Material structure
Multicomponent mass consisting of bitumen-rubber binder, filler, processing aids, solvent.Destination
It is used for gluing rolled roofing and waterproofing materials, building waterproofing designs and as anti-corrosion material (for restoration underbody coating)Technical features:
1 |
Appearance |
blackorbrown indiscrete mass |
2 |
Heat resistance at a temperature 100°Сduring 5 hours,shouldn’t shift |
shouldn’tbebulgingsandfeatures of covering composition shifting |
3 |
Bendingflexibilitywith round radius 5,0 ±0,2 mmat a temperature – 15° С |
shouldn’t be ruptures on the sample surface |
4 |
Adhesionstrengthwith basismPa (kgs/sm2) not less than |
0,2 (2,0) |
5 |
Waterproofingduring 24 hours |
shouldn’t be beads, steam blowsandpeeling |
6 |
Wateradsorptionduring 24 hours,% /mass, not more than |
2 |
7 |
Approximatetimeofvulcanization (solidification) orspreadable life |
after 6 hoursofmasticapplying,1,0 mmlayer,shouldn’tbe washed out. |
Method of use
Clean the surface of dirt and remaining old coatings and degrease.Apply mixed mastic with a brush in 2 layers with interlayer drying for about 3 hours at a temperature of 15-250 C and drying the latter layer for 24 hours.
Coating thickness                          - 0.7-0.8 mm
Consumption                                  - 0,7-0,8 kg/m2
In case of thickening, dilute to the required viscosity with white spirit.